What is split in Catia?

How do I cut volume in Catia?

You can edit a Trim feature and modify the cutting volume. To do so, simply double-click the feature in the specification tree and then select a new volume in the Cutting volume field.

How do I get section view in Catia Drafting?

Creating a Section View

  1. Click the Drawing window, and click the Offset Section View icon. from the Views toolbar (Sections subtoolbar).
  2. Select the holes and points required for sketching the callout on the view. …
  3. Double-click to end the cutting profile creation.

How do I cut a view in Catia?

About the Cut in section views capability



In the Assembly Design workbench, select one part, then the Edit > Properties command from the menu bar from and either activate or de-activate the Cut in section views option. You can also do this when overloading element properties in a view generated from a CATProduct.

How do you split a surface in Catia?

Splitting Closed Surfaces by Two Connex Surfaces or Curves

  1. Click Join . The Join Definition dialog box appears.
  2. Select Split. 1 and Inverse. …
  3. Clear Check connexity .
  4. Click OK to create the joined surface.
  5. Click Split . The Split Definition dialog box is displayed.
  6. Select Surface. …
  7. Click OK to split the closed surface.
IT IS INTERESTING:  How do I copy a cad in Excel?

What is the difference between split and trim in Catia?

Split: Split in CATIA is used to cut off one element with another element. … Trim: By the Trim option in Catia, a user can cut off two elements interchangeably. When we are going to trim, it is important to select the elements that we are going to cut off(They will appear in the trimmed elements field).

How do I cut an assembly in Catia?

Creating an Assembly Cut

  1. Click Assembly Cut . …
  2. Select Create new 3DShape in the 3DShapes list and click OK. …
  3. Click OK in the 3D Shape / Representation DS dialog box.
  4. Select the geometry in the assembly where you want to create the split features. …
  5. Click OK in the Warning dialog box.

What is a rib in Catia?

This task shows you how to create a rib, that is how to sweep a profile along a center curve to create material. To define a rib, you need a center curve, a planar profile and possibly a reference element or a pulling direction. To create ribs you can combine the different elements as follows: Open profile.

How do I use the slot in Catia V5?

To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction. Select the profile, i.e. Sketch.



It is closed.

  1. Click to open the Sketcher and edit the profile. …
  2. For example, enlarge the profile.
  3. Quit the Sketcher when done. …
  4. Maintain the Keep angle option.
All about design