How do you use cavity command in SolidWorks?

How do you fill cavities in Solidworks?

Filling a Mold Cavity Using Combine

  1. Open the mold assembly in SOLIDWORKS.
  2. Insert Components > New Part. Select a reference plane i.e. Top plane. Exit out of the sketch command.
  3. Insert > Features > Join. Group select all of the parts of the assembly.

Where is cavity feature solidworks?

Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity. In the PropertyManager, under Design Components, select the design parts from the FeatureManager design tree. Under Scale Parameters: Select the point about which scaling occurs for Scale about.

How do you extract core and cavity in Solidworks?

Open a part containing a core surface body, a cavity surface body, and a parting surface body. Select a face or plane that is perpendicular to the direction of pull. The selected face or plane is used to define a sketch outline that splits the core and cavity segments. Click Tooling Split (Mold Tools toolbar).

What is Cavity feature?

These cavity features are derived from the specific organs of speech in the mouth and the nose namely, the tongue, palate, lips and nose.

How do you find the volume of a cavity in SolidWorks?

Measuring Internal Volume

  1. With an open part, click Intersect (Features toolbar) or Insert > Features > Intersect.
  2. In the FeatureManager design tree, select Shell1 and Plane6.
  3. Click Intersect (Features toolbar) or Insert > Features > Intersect.
  4. In the PropertyManager, click Create internal regions and click Intersect.
IT IS INTERESTING:  Your question: How do I export STL files to SketchUp?

How do I fill between two surfaces in SolidWorks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

Why is cavity grayed out in Solidworks?

Cavity can’t do anything (and will be greyed out) if you have only a single (or no) solid body.

How do you subtract one body from another in Solidworks?

To subtract bodies:

  1. Click Combine. (Features toolbar) or Insert > Features > Combine.
  2. In the PropertyManager, under Operation Type, select Subtract.
  3. For Main Body, select the body to keep. …
  4. For Bodies to Subtract, select the bodies whose material you want to remove.
  5. Click Show Preview to preview the feature.
  6. Click .

How do I use the core command in Solidworks?

To create a core:

  1. Open a sketch on the inside face of the Cavity Body, as shown.
  2. Sketch the outline of the core you want to create. Front view. …
  3. Close the sketch.
  4. With the sketch selected, click Core. …
  5. In the PropertyManager, set the options as described below, then click .
All about design