How much oil does my 660 rhino take?

The factory manual says you’ll need to add 2.01 quarts (1.90 liters) after an oil change only. If you replaced the filter, you’ll need to pour in 2.11 quarts (2.00 liters) total.

How do you check the oil on a Rhino 660?

Pull out dipstick wipe it clean. Insert till it stops DO NOT THREAD IT IN. Pull it out and there you will have the correct level of oil. The Rhino 660 holds 2.5 Quarts of oil with filter change.

How much oil does a 2004 Grizzly 660 take?

Fill the engine with 2.11 quarts of 10W40 ATV engine oil, and reinstall the dipstick.

How many hours will a Yamaha Rhino last?

It all depends on how it is used and maintained. 500 hours may seem like a lot compared to other Rhinos but my average speed is 16mph so 500 hours would be 8,000 miles. I have around 358 hours and 5800 miles on my ’08 Rhino and it runs great.

What is a 2007 Yamaha Rhino worth?


Suggested List Price Average Retail
Base Price $9,599 $5,520
Options (Add)
Total Price $9,599 $5,520

What kind of oil does a Rhino 450 take?

Yamalube Oil Change Kit 10W-40 for Yamaha RHINO 450 4X4 2006-2009.

IT IS INTERESTING:  How do you dimension a curved wall in AutoCAD?

How can I make my Yamaha Rhino 660 faster?

If you don’t need to go faster than 50-52mph just do the sheave. If you want more power within that speed range get a fuel programmer, then intake, exhaust tip or aftermarket exhaust. If you want to go faster you can now add the ecu module which will give you more rpms.

How much oil does a grizzly 700 hold?

Refill the oil tank with Yamalube 10W-40 oil using the specifications provided by Yamaha, which is 2.2 quarts of oil. PRO TIP: Add 2 quarts of oil first, then let your machine run for a minute with the dipstick on to circulate the oil.

All about design