How do you scale a drawing in Sketchup layout?

How do you do scale drawings?

Drawings can be scaled up or down using either a calculator or a scale rule. To scale a drawing using a calculator: divide the measurement by the scale if you want to reduce the drawing in size, or. multiply the measurement by the scale if you want to increase it in size.

How do you scale up architectural drawings?

To convert an architectural drawing scale to a scale factor:

  1. Select the desired scale. 1/8″ = 1′-0″
  2. Invert the fraction and multiply by 12. 8/1 x 12 = Scale Factor 96.

What is a scale layout?

When you work in a layout, the scale factor of a view in a layout viewport represents a ratio between the actual size of the model displayed in the viewport and the size of the layout. … For example, for a quarter-scale drawing, the ratio would be a scale factor of one paper space unit to four model space units, or 1:4.

How do you scale a drawing by hand?

How to Scale Things Down for a Drawing

  1. Measure the objects that you want to draw. …
  2. Write down your notations. …
  3. Scale the items by use of ratios. …
  4. Divide the 10 by the measured length of the wall, 120, which looks like this as a fraction: 10/120. …
  5. Set up a ration for the height of the wall, too.
IT IS INTERESTING:  Can I download SketchUp on Android?

What does scale 1.50 mean?

1:50 is a ratio. it means you’re scaling 1 unit to 50 units. that could be inches (1″=50″) or miles (1 mile=50 miles) or anything else, but it’s a direct scale.

What scale is used for a section drawing?

Referred to as 1:10, 1:20, 1:30,1:40, 1:50 or 1:60 scale. Typically in civil engineering applications, 1:10 (1″=10′) is used exclusively for detail drawings. 1:20 and 1:40 scales are used for working plans. 1:60 is normally used only to show large areas of a project.

How do you scale dimensions?

To scale an object to a smaller size, you simply divide each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension.

All about design