How do you revolve in Solidworks?

To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

Why can’t I revolve in SolidWorks?

Listen to SolidWorks

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

What is needed to revolve a feature?

A revolved feature is an axisymmetric shape that is created by revolving an open or closed section view by a specified angle around a central axis. The section can represent a protrusion or a cut, that is, it can either add material or take it away.

Where is revolve in SolidWorks?

Revolved Cut (Features toolbar) or Insert > Cut > Revolve. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

What is revolved boss in SolidWorks?

To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

IT IS INTERESTING:  What is the use of result viewer in Ansys?

How do you make a lofted boss in Solidworks?

How to use Lofted Boss/Base

  1. Click New. …
  2. Click Top Plane and click on Sketch.
  3. Click Circle, sketch a circle start at origin. …
  4. Exit sketch.
  5. Click Top Plane and click Features>Reference Geometry>Plane. …
  6. Click on Plane 1, click Sketch.
  7. Click Circle, sketch a circle start at origin. …
  8. Click on Plane 2, click Sketch.

What are the two components necessary for creating a revolve feature?

There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only.

For non-base features, specify an Operation:

  • Join . Adds the volume created by the revolved feature to another feature or body. …
  • Cut . …
  • Intersect . …
  • New Solid .

How do you use the revolve feature?

There are several ways to activate the Revolve tool:

  1. Click Model > Revolve and create a sketch to revolve. This method is referred to as action-object.
  2. Select an existing sketch and then click Model > Revolve. …
  3. Select a datum plane or planar surface to use as the sketching plane and then click Model > Revolve.

What is revolve command?

REVOLVE ignores the width of a polyline and revolves from the center of the path of the polyline. The right-hand rule determines the positive direction of rotation. The following prompts are displayed. Objects to Revolve. Specifies the objects to be revolved about an axis.

What is swept boss base in SolidWorks?

Swept Boss/Base PropertyManager

  • Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path.
  • Click Swept Boss/Base (Features toolbar).
IT IS INTERESTING:  Best answer: What high school courses are needed to become an architect in Canada?

What does the revolve tool do Onshape?

Revolve rotates Faces, Sketch regions, Edges, and Sketch curves about a central axis in order to create, add to, remove, or intersect a part. … When Revolve Solid is selected at the time a sketch is open, Onshape automatically selects all the closed regions in the sketch.

All about design