How do you offset mate in Solidworks?

How do you fix mates in Solidworks?

To fix or float an assembly component:

  1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
  2. Select Fix or Float.
  3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do you move mates in Solidworks?

In the PropertyManager, under Advanced Mates:

  1. Click Distance or Angle .
  2. Set Distance or Angle to define the starting distance or angle.
  3. Select Flip Dimension to move the entities to opposite sides of the dimension.
  4. Set Maximum Value and Minimum Value to define the maximum and minimum extents of the limit mate.

How do you make an offset mate in Solidworks?

To add a limit mate:

  1. Click Mate (Assembly toolbar) or Insert > Mate.
  2. Under Mate Selections, select the entities to mate together for Entities to Mate .
  3. In the PropertyManager, under Advanced Mates: Click Distance or Angle . …
  4. Click . A LimitDistance or LimitAngle mate is added to the assembly.

How do you use advanced mates in Solidworks?

SOLIDWORKS Advanced Width Mate – Taking It One Step Further!

  1. Plates to be Advanced Mated. Click on the Mates command, choose the Advanced Mate category and then choose the Width Mate.
  2. Choose Advanced Width Mate. …
  3. Select the Width and Tab Selections. …
  4. End Result: Equal Gap on Either Side.
IT IS INTERESTING:  How do you copy multiple items in Lumion?

How do you use mates in SolidWorks?

To add a mate: Click Mate (Assembly toolbar), or click Insert > Mate. In the PropertyManager, under Mate Selections, select the entities that you want to mate together for Entities to Mate . You can temporarily hide faces to select an obscured face by hovering over a face and pressing Alt.

How do you use path mate?

To add a path mate:

  1. Click Mate (Assembly toolbar) or Insert > Mate.
  2. In the PropertyManager, under Advanced Mates, click Path Mate .
  3. Under Mate Selections: …
  4. Under Advanced Mates, for Path Constraint, select one: …
  5. For Pitch/Yaw Control, select one: …
  6. For Roll Control, select one: …
  7. Click .

How many entities can you choose to mate with an angle mate?

Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.

What is a distance mate solidworks?

Enter a distance value in the Distance box in the Mate PropertyManager. … The default value is the current distance between the selected entities.

What are mechanical mates in Solidworks?

Mechanical mates include cam-follower, gear, hinge, rack and pinion, screw, slot, and universal joint mates. A cam-follower mate is a type of tangent or coincident mate. It allows you to mate a cylinder, plane, or point to a series of tangent extruded faces, such as you would find on a cam.

What does lock mate do?

A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.

IT IS INTERESTING:  Can you break a hatch Civil 3d?

What is a concentric mate in Solidworks?

Concentric: Places two cylindrical, spherical or conical faces of a part so that they share the same centerline. Lock: Keeps two components at the same position and orientation.

How do I set boundaries in Solidworks assembly?

In the PropertyManager, under Advanced Mates:

  1. Click Distance or Angle .
  2. Set Distance or Angle to define the starting distance or angle.
  3. Select Flip Dimension to move the entities to opposite sides of the dimension.
  4. Set Maximum Value and Minimum Value to define the maximum and minimum extents of the limit mate.
All about design