How do I replace a model in Solidworks assembly?

Can you edit parts in assembly solidworks?

To edit a part while in an assembly: Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. The title bar shows the name of the part in the assembly that is open for editing as in .

How do you disassemble an assembly in Solidworks?

In the FeatureManager design tree, right-click the subassembly you want to dissolve, and select Dissolve Subassembly. You can also select the subassembly icon and click Edit > Dissolve Assembly. The components become components of the immediate parent assembly, and the subassembly is removed.

How do I edit a step in Solidworks 2020?

You need to add a feature to the imported body.

  1. Select the bottom face of the imported body.
  2. Click Chamfer . …
  3. Under Chamfer Parameters, make the desired settings and click OK . …
  4. Right-click Imported1 in the FeatureManager design tree and select Edit Feature. …
  5. Click OK. …
  6. Select the STEP file and click Open.

How do I change external references in Solidworks?

Update Path for External References

  1. Select an update holder in the tree to highlight the corresponding sketch in the graphics area.
  2. Right-click an update holder and click List External Refs to lock, unlock, or break the external references.
IT IS INTERESTING:  Best answer: What is the difference between architect and solution architect?

How do I fix a part in a Solidworks assembly?

To fix or float an assembly component:

  1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
  2. Select Fix or Float.
  3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do I create a new part in assembly in Solidworks?

To create a part within an assembly:

  1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
  2. Type a name for the new part in the Save As dialog box and click Save.
  3. Select a plane or planar face (while the pointer is ). …
  4. Construct the part features, using the same techniques you use to build a part on its own.

How do you edit a placement in Creo?

if you want to modify a constraint of assembled component, then you can:

  1. select the component in Model Tree.
  2. press RMB and click Edit Definition command.
  3. in Component Placement tab > activate Placement sub-tab.
  4. now you can see all constraints and you can change references.
All about design