On the command line in AutoCAD, type LWDISPLAY and set the value to On (or 1). Alternatively, use the Show/Hide Lineweight button that can be added to the status bar.
How do I stop unwanted lines in AutoCAD?
Solution: On the command line in AutoCAD, type LINESMOOTHING and set it to Off (0). You can also enter the GRAPHICSCONFIG command and disable the “Smooth line display” checkbox. Turning off hardware acceleration completely can also prevent unwanted linework from showing.
Why is my polyline so thick in AutoCAD?
Causes: The Polyline has a global width that is set to a thicker lineweight in the drawing.
How do I change the width of AutoCAD global?
If you need to set all of your plines to a single width, open the properties window, type qselect, change object type to “polyline”, set operator to “select all”, then click ok. Changing the global width to 0.25 in the properties window is all you have to do.
Why are my AutoCAD lines jagged?
Causes: Line smoothing is disabled.
Why are my lines not straight in AutoCAD?
Solution: Do one or more of the following to adjust the line display in AutoCAD: Install the latest updates for AutoCAD (see Install Updates, Add-ons, and Enhancements). On the command line in AutoCAD, enter GRAPHICSCONFIG and verify that the correct video card is being used (see AutoCAD uses the wrong graphics card).
How do I fix lines in AutoCAD?
- Unlock, thaw, and turn on all layers.
- Choose a point close to the objects and note down its coordinates.
- Type MOVE and press Enter.
- Type ALL and press Enter.
- Choose the previously determined point as a base point and 0,0 as an end point. …
- Save and close the drawing.
How do you cut lines in CAD?
On the Annotation tool palette, click the Cut Line Tool. In the drawing area, specify the point where you want the cut line to begin. Specify the point where you want the cut line to end. Specify the extents of the break.
Is line thickness the same a polyline width?
Think of thickness as the height of the line or how tall it is (like a fence in your yard). This is different from the width of the line that you learned in the polyline lesson or lineweight (which is a display property).
How do you adjust the width of a polyline?
To apply width to an existing polyline, type “PE” on the command line and press “Enter.” Then select the polyline for which you want to change the width. Select the width option from the command line and enter the value of the width you want to apply on this polyline.